What is an adapter?
An adapter is an electrical device having one hardware or electronic interface that can be accommodated to another hardware or electronic interface without any loss. In computers, the adapter is accommodated into a card. This adapter can easily be inserted into a slot called a motherboard.
With the advancement of science and technology, the uses of technology also got advanced. No one in this modern time is the one who doesn’t have large or small electrical appliances in his home. The auxiliary equipment is the must-having device for these large appliances to work properly, such as switching power supplies.
Here in this technology article, we will mainly light up the use and features of the 12v power supply adapter. If you are involved in technology, you must know that a power adapter is an inseparable device for many electronic devices. It is not like a battery, as some people think.
Introduction to 12v power supply adapter:
A DC 12v power supply adapter is an electronic device designed to convert the ac voltages to dc voltages. The power supply Adapter generally consists of the following elements:
- Transformer
- Rectifier
- Filter and
- Regulator circuits.
A DC 12v power supply has some primary functions, which involve the conversion of electric current to power load from a source with correct voltages, current, and frequency. The power suppliers are also known as power converters because of the earlier conversion.
Use of 12v power supply adapters:
Following are the uses of 12v power supply adapters. These adapters have some quality uses, which are cracked here:
- 12v power supply adapters are mainly used
- Process controls
- Test equipment
- Communications
- Low voltage lighting
- Burglar Alarms.
A 12v power supply adapter supplies a 12-volt input or output. This is often used in applications that are related to vehicles.
A 12v DC input is also identified as a DC-DC converter. They are used significantly in vehicles that operate on their 12-volt batteries.
A 12-volt output power supply is also used in vehicular equipment before they are installed in the vehicles. For example, the radio communications equipment is the best example of it.
Features of a 12v power supply adapter:
- The 12v power supply usually has an Input Voltage with this figure: AC 110/220V 15%
- Output voltage is featured as 12V DC, 5A, and 60W
- The output voltage is adjusted with this adjustment Range: ±10%
- Protection of this adapter is featured as overload, over voltage, and here is also a short circuit auto-recovery (After Protection).
- Universal AC input / Full range.
- There is 100% full load burn-in test cooling. Free air convection tests the test cooling.
- This has good quality and efficient performance.
- It has a compact size and is lightweight.
- This adapter has a high reliability.
- It features a power LED monitor which glows when it is in use.
- It has a high efficiency because of its low energy consumption.
- This power supply features the switch mode power adaptor category.
- The output of DC is featured as 12 volts with 5 Amp.
Note: These features are reviewed by our experts while reviewing the Power Supply 12V with 2A specifically compatible with Arduino® UNO.
