COLE CUSTER
Richmond Advance
No. 41 HaasTooling.com Ford Mustang for Stewart-Haas Racing
Event Overview
● Event: Richmond 400 (Round 7 of 36)
● Time/Date: 3:30 p.m. EDT on Sunday, April 3
● Location: Richmond (Va.) Raceway
● Layout: .75-mile oval
● Laps/Miles: 400 laps/300 miles
● Stage Lengths: Stage 1: 70 laps / Stage 2: 160 laps / Final Stage: 170 laps
● TV/Radio: FOX / MRN / SiriusXM NASCAR Radio
Notes of Interest
● Cole Custer and the No. 41 HaasTooling.com Ford Mustang team for Stewart-Haas Racing (SHR) kick off back-to-back-to-back weekends of classic short-track racing when the NASCAR Cup Series heads to the .75-mile Richmond (Va.) Raceway oval for Sunday’s Richmond 400. The series ventures south but remains in the Capital of the Commonwealth of Virginia the following weekend for a Saturday-night race under the lights on the half-mile Martinsville Speedway paperclip-shaped oval. And the short-track stretch winds up on the high-banked, half-mile Bristol (Tenn.) Motor Speedway oval for the second annual Food City Dirt Race.
● In February, Custer and the No. 41 team finished seventh – best among the four SHR teams – in the season-opening, non-points-paying Busch Light Clash on the quarter-mile paved oval inside the Los Angeles Memorial Coliseum.
● Sunday’s 400-lap race marks Custer’s 82nd career NASCAR Cup Series start and his fifth at Richmond. His 14th-place finish in the September 2020 race there is the best of his previous four outings, helping him earn 2020 Cup Series Rookie of the Year honors. He started 21st and finished 22nd in his most recent outing there last fall.
● In NASCAR Xfinity Series competition, Custer’s seven career starts at Richmond is more than he’s had at any other track. Best among those starts was the April 2019 race, when he qualified fourth in the No. 00 SHR Ford, led a race-high 122 of 250 laps and took the checkered flag 2.639 seconds ahead of runner-up and fellow Ford driver Austin Cindric. He followed that up with a third-place finish in that year’s September race for his fourth Xfinity Series top-six in seven Richmond starts. Custer also started on the pole and led 43 laps en route to a sixth-place finish in the April 2018 race in his SHR Ford, and scored a sixth-place finish in his Richmond debut in the Xfinity Series, driving the No. 5 JR Motorsports entry in the April 2016 race.
● Custer’s first two Richmond outings came in the NASCAR K&N Pro Series East in 2013 and 2014. The first year, he started and finished third after leading 24 of 100 laps, then came back the following year to qualify second and lead a race-high 52 of 100 laps en route to his fourth of four career victories in K&N Pro Series competition.
● Last Sunday, in the season’s first of six road-course races at Circuit of the Americas in Austin, Texas, Custer was vying for a top-five finish during a late restart, only to get spun in the multicar chaos and having to settle for a 23rd-place finish. He arrives at Richmond 28th in the driver standings.
● Riding along with Custer and his SHR Mustang is team co-owner Gene Haas’ newest holding, Haas Tooling, which was launched as a way for CNC machinists to purchase high-quality cutting tools at great prices. Haas cutting tools are sold exclusively online at HaasTooling.com and shipped directly to end users. HaasTooling.com products became available nationally in July 2020. Haas Automation, founded by Haas in 1983, is America’s leading builder of CNC machine tools. The company manufactures a complete line of vertical and horizontal machining centers, turning centers and rotary tables and indexers. All Haas products are constructed in the company’s 1.1-million-square-foot manufacturing facility in Oxnard, California, and distributed through a worldwide network of Haas Factory Outlets.
Cole Custer, Driver of the No. 41 HaasTooling.com Ford Mustang for Stewart-Haas Racing
You’ve logged more laps at Richmond than perhaps any other track where NASCAR races. Sunday’s race marks your 14th career start there between the Cup Series, Xfinity Series and K&N East Series. What’s been your favorite Richmond memory?
“Definitely winning there in the Xfinity Series a few years ago. It was my first short-track win in the Xfinity Series and it meant a lot because we worked pretty hard to try and get our short-track stuff better, and it’s not an easy track to get around. So, it meant a lot to win that one.”
You’ve run at Richmond so much during your career, are you immersed in footage and data from your previous runs there to figure out how you’re going to get around there Sunday in the new NextGen car?
“Yeah, that’s every weekend for me. I look at old races and try and talk to (SHR teammate) Kevin (Harvick) every weekend to find out what he’s looking for. He’s been a huge help the last few years. All of my teammates have been. It was tough going straight to racing with no practice or qualifying the last two years. You can look at as much film and data as you want, but you’re still missing the experience of actually being out there. You know what you need to work on, but you really don’t learn as much until you’re actually out there on the track. This year, it’s huge to have the chance to practice and qualify and hopefully that’ll help put us over the top during this stretch of short-track races.”
You’re six races into your third season in the Cup Series. What kinds of things have you learned by being an SHR driver, and what kinds of things are you trying to build on?
“It’s been huge and awesome to be a part of an organization like Stewart-Haas just because you have such great teammates. You look at a guy like Kevin Harvick, who has a championship and so much success under his belt, I probably called him every single weekend of my rookie season. Being able to lean on a guy like that has been huge. Now that I’m in my third year in the Cup program, you kind of get an idea of what to look at when you’re going to these racetracks and how everybody’s going to race and how it’s all going to work – you understand the flow a lot better. So I think, this third year, it’s a year where you’re looking to really have it all together by the time all is said and done.”
No. 41 HaasTooling.com Team Roster
Primary Team Members
Driver: Cole Custer
Hometown: Ladera Ranch, California
Crew Chief: Mike Shiplett
Hometown: Amherst, Ohio
Car Chief: Tony Cardamone
Hometown: Bristol, Virginia
Engineer: Lee Deese
Hometown: Rockingham, North Carolina
Engineer: Scott Bingham
Hometown: Lawrenceville, Georgia
Spotter: Andy Houston
Hometown: Hickory, North Carolina
Over-The-Wall Members
Front Tire Changer: Josh Leslie
Hometown: Mount Clemens, Michigan
Rear Tire Changer: Coleman Dollarhide
Hometown: Hickory, North Carolina
Tire Carrier: Chad Emmons
Hometown: Tyler, Texas
Jack Man: Matthew Schlytter
Hometown: Ponte Vedra, Florida
Fuel Man: Dewayne Moore
Hometown: Griffin, Georgia
Road Crew Members
Mechanic: Joe Zanolini
Hometown: Sybertsville, Pennsylvania
Shock Specialist: Aaron Kuehn
Hometown: Kensington, Connecticut
Tire Specialist: Austin Greco
Hometown: Harrisburg, North Carolina
Transporter Co-Driver: David Rodrigues
Hometown: Santa Clarita, California
Transporter Co-Driver: Charlie Schleyer
Hometown: Youngsville, Pennsylvania
